LDX-028A New servo feed alloy saw blade double grinding head side grinding machine
In order to better use the alloy head saw blade grinding machine, to achieve the use of saving worry and effort, if your grinding machine tooth extraction abnormal phenomenon, then can not be pulled at will, or can not go back up after pulling.
1,Solenoid valve failure, clean the solenoid valve.
2,The tooth extraction proximity switch is not bright, so that the tooth extraction signal cannot be detected after it is pulled out, and the rod cannot be pulled out. Open the outer cover of the tooth assembly, check the position of the proximity switch, and adjust it again.
3,Throttle valve failure, adjust or replace.
Classification of multi-blade saw gear grinding machine shaving process:
1,When the gear grinding machine is shaving the teeth diagonally, the drum shape that may occur in the direction of the teeth is realized by the swing of the table around the center.
2,As we all know, radial shaving takes less time than tangential shaving, but the machining surface is rougher. The solution is to remove a large margin by radial cutting and then finish by axial or diagonal shaving.
3,Different tooth direction correction can be obtained by using discontinuous diagonal shaving cycle and double shaving process.
| Technical parameters: |
| Saw web machining diameter range:￠100-￠800mm |
| Saw web bore diameter: 12-220mm |
| Thickness of saw web (steel plate):1-10mm |
| Tooth pitch: 5-80mm |
| Front inclination angle, inclination angle: 5°-15° |
| Radial angle: 3°-15° |
| Operating speed: 18 teeth/min |
| Feeding stroke: 1-28mm (stepless variable speed) |
| Grinding wheel dimensions: 80*100*32mm |
| Grinding speed: 26m/s |
| Coolant pump flux: 501/min |
| Coolant cylinder volume: 90L |
| Total power: 4.3KW |
| Voltage: Three-phase 380v |
| Weight: 1,100KG |
| Outer diameter dimensions: 1.75*1.4*2.0mm |
| Technical characteristics: |
An intuitive and simple whole Chinese operation interface is matched with a large-sized touch screen, so the equipment is easier to operate, and all preset procedures or self-compiled procedures are more convenient to call; the servo tool setting device features accurate positioning, so the product grinding accuracy is greatly ensured. Due to the adoption of high-quality and high-accuracy castings and machined parts, the service life of the equipment is greatly prolonged, and the equipment is simple and easy to operate and maintain; one person can operate many pieces of equipment at the same time, so the production efficiency is greatly improved, and the cost is reduced.
|
Product Tags:
|
|
LDX-028A New Servo Feed Alloy Saw Blade Double Grinding Head Side Grinding Machine Images
|
